The 1" tube frame makes the SAVER SAW easy to hold onto.

The SAVER SAW frame is powder coated which is 10 times strong than painting and gives long life and good looks.

The SAVER SAW Windscreen entry point can be used for a toughened glass punch and a laminated entry point.

The SAVER SAW has a fold up blade. This makes for smaller storage in the appliance.

The teeth on the blade of the SAVER SAW face outwards pulling the glass out of the car for increased patient safety.

The blade is specially manufactured for the SAVER SAW. High speed steel with a modified tooth form and tooth set give the teeth extra strength.

The SAVER SAW blade is hardened, then tempered back to retain its hardness and greatly increase toughness.

The SAVER SAW handles, top and bottom, ensure that every cut is progressive.

The SAVER SAW blades are steam tempered to lessen cutting friction.

All SAVER SAW components are laser cut for accuracy and uniformity.

A complete cut on a windscreen takes about 40 seconds making the SAVER SAW a fast tool to use.

The 10TPI blade is standard on the SAVER SAW. It cuts a fine slot through the glass without pulling large fragments of glass out of the windscreen.

The SAVER SAW comes standard with two blades so there is one in the tool and one spare on the appliance